|
Internal (LVD)
| | Desktop (LVD)
| | Internal (HVD)
| | Desktop (HVD)
| |
|
|
|
Capacity and Interface | | | | | Compressed Capacity | 200 GB | | Native Capacity | 100 GB | | Recording Format | LTO-1 | | Interface Type | Ultra 160 SCSI (LVD)
Ultra2 SCSI (HVD) |
| | | | |
Environmental | | | | | Min/Max Operating Temp | 10 deg C / 40 deg C | | Max Operating Humidity | 80% | | Max Operating Vibration | .5 G | | Max Non-Operating Vibration | 1.0 G |
| | | | |
Performance | | | | | Native Sustained Transfer Rate | 57.6 GB/hour | | Compressed Sustained Transfer Rate | up to 115.2 GB/hour | | Native Burst Transfer Rate | 80 Mbytes/sec | | Compressed Burst Transfer Rate | up to 160 MB/sec | | Average File Access Time | 76 seconds | | Backup Speed | 57.6 GB/hour | | Compressed Backup Speed | up to 115.2 GB/hour | | Buffer Memory Size | 64 MB |
| | | | |
|
|
|
 | Note: Veritas BackupExec and Veritas NetBackup Drivers
If you are using Veritas BackupExec or Veritas NetBackup you should use the device driver that came with your software backup package. |
 | - LTO Tape Drive Driver for Windows
- The device driver allows you to use LTO tape drives with Windows 2000, Windows XP, Windows Server 2003 and Vista running on x86 and x64 platforms. This is a self-extracting, compressed file that unzips into a set of files. Please view the LtoReadMe.htm file for installation instructions.
| | - Certance/Seagate LTO 1 200GB Tape Drive Driver for Windows NT 4.0
- ViperNT4_1.9_B.exe.zip - ViperNT4.sys for Intel 32-bit Computers
| | - LTO 1 & 2 drives with BakBone
- SEALT01.npk Template for the LTO2 drive (will work with LTO1 drives).
|
|
|
|
| - V16142626-000
- This firmware is for stand-alone drives only. If your drive is part of a library or was purchased through an OEM, contact the vendor for the latest code that has been tested as part of the system.
- Upgrade instructions can be found here.
|
|
|
|
|
|
|
Product Use Guides |
